151) Which of the following is used for servicing and repairs of the aircraft?

Answer Discuss in Comment

Hanger

152) The main disadvantage of angle nose out parking configuration of aircraft is that the

Answer Discuss in Comment

Hot blast is directed towards the terminal building

153) The slope of the transitional surface for A, B and C type of runway shall be

Answer Discuss in Comment

1:7

154) As per ICAO recommendation, the rate of change of longitudinal gradient per 30 m length of vertical curve for A and B type of airports is limited to a maximum of

Answer Discuss in Comment

0.1%

155) Maximum gross take-off weight of an aircraft is

Answer Discuss in Comment

More than the maximum structural landing weight

156) The Centre to Centre spacing of heliport lighting along the periphery of landing and takeoff area should be

Answer Discuss in Comment

7.5 m

157) According to ICAO, all markings on the runways are

Answer Discuss in Comment

White

158) Runway threshold is indicated by a series of parallel lines starting from a distance of

Answer Discuss in Comment

6 m from runway end

159) For determining the basic runway length, the landing case requires that aircraft should come to a stop within p % of the landing distance. The value of p is

Answer Discuss in Comment

60%

160) Calm period is the percentage of time during which wind intensity is less than

Answer Discuss in Comment

6.4 kmph

Airport Engineering

151) Which of the following is used for servicing and repairs of the aircraft?

152) The main disadvantage of angle nose out parking configuration of aircraft is that the

153) The slope of the transitional surface for A, B and C type of runway shall be

154) As per ICAO recommendation, the rate of change of longitudinal gradient per 30 m length of vertical curve for A and B type of airports is limited to a maximum of

155) Maximum gross take-off weight of an aircraft is

156) The Centre to Centre spacing of heliport lighting along the periphery of landing and takeoff area should be

157) According to ICAO, all markings on the runways are

158) Runway threshold is indicated by a series of parallel lines starting from a distance of

159) For determining the basic runway length, the landing case requires that aircraft should come to a stop within p % of the landing distance. The value of p is

160) Calm period is the percentage of time during which wind intensity is less than

Subject Notes

Objective Box

PSC ADVERTISEMENT

Your Reaction

Copyright © | 2021 - 2024 | Civil Boss For "MCQ" and Psc Notes. All rights Reserved

Airport Engineering

151) Which of the following is used for servicing and repairs of the aircraft?

152) The main disadvantage of angle nose out parking configuration of aircraft is that the

153) The slope of the transitional surface for A, B and C type of runway shall be

154) As per ICAO recommendation, the rate of change of longitudinal gradient per 30 m length of vertical curve for A and B type of airports is limited to a maximum of

155) Maximum gross take-off weight of an aircraft is

156) The Centre to Centre spacing of heliport lighting along the periphery of landing and takeoff area should be

157) According to ICAO, all markings on the runways are

158) Runway threshold is indicated by a series of parallel lines starting from a distance of

159) For determining the basic runway length, the landing case requires that aircraft should come to a stop within p % of the landing distance. The value of p is

160) Calm period is the percentage of time during which wind intensity is less than

Subject Notes

Objective Box

PSC ADVERTISEMENT

Your Reaction

Copyright © | 2021 - 2024 | Civil Boss For "MCQ" and Psc Notes. All rights Reserved

Follow us