251) The pigment used in paints for corrosive resistance is

Answer Discuss in Comment

red lead

252) Lacquer paints are

Answer Discuss in Comment

all the above

253) Lacquer is

Answer Discuss in Comment

spirit varnish

254) The pigment commonly used in the manufacture of paints is

Answer Discuss in Comment

all the above

255) The height of the cone in slump test is

Answer Discuss in Comment

30cm

256) The aggregate is called fine aggregate if it is completely retained on

Answer Discuss in Comment

0.15 mm sieve

257) The aggregate is called coarse aggregate if it is completely retained on

Answer Discuss in Comment

4.75 mm sieve.

258) In low heat cement, the proportion of the following compound is kept at low value

Answer Discuss in Comment

both (a) and (b)

259) In briquette test, the seven day tensile strength of good portland cement should not be less than

Answer Discuss in Comment

25 kg/cm2

260) The seven day compressive strength of a good Portland cement, as obtained from the V Compressive test on cement sand mortar cubes, should not be less than

Answer Discuss in Comment

150 kg/cm2

Construction Materials

251) The pigment used in paints for corrosive resistance is

252) Lacquer paints are

253) Lacquer is

254) The pigment commonly used in the manufacture of paints is

255) The height of the cone in slump test is

256) The aggregate is called fine aggregate if it is completely retained on

257) The aggregate is called coarse aggregate if it is completely retained on

258) In low heat cement, the proportion of the following compound is kept at low value

259) In briquette test, the seven day tensile strength of good portland cement should not be less than

260) The seven day compressive strength of a good Portland cement, as obtained from the V Compressive test on cement sand mortar cubes, should not be less than

Subject Notes

Objective Box

PSC ADVERTISEMENT

Your Reaction

Copyright © | 2021 - 2026 | Civil Boss For "MCQ" and Psc Notes. All rights Reserved

Construction Materials

251) The pigment used in paints for corrosive resistance is

252) Lacquer paints are

253) Lacquer is

254) The pigment commonly used in the manufacture of paints is

255) The height of the cone in slump test is

256) The aggregate is called fine aggregate if it is completely retained on

257) The aggregate is called coarse aggregate if it is completely retained on

258) In low heat cement, the proportion of the following compound is kept at low value

259) In briquette test, the seven day tensile strength of good portland cement should not be less than

260) The seven day compressive strength of a good Portland cement, as obtained from the V Compressive test on cement sand mortar cubes, should not be less than

Subject Notes

Objective Box

PSC ADVERTISEMENT

Your Reaction

Copyright © | 2021 - 2026 | Civil Boss For "MCQ" and Psc Notes. All rights Reserved

Follow us