111) In concrete mix design, allowance for surface water carried by aggregate is necessary in case of

Answer Discuss in Comment

Both (a) and (b)

112) Steam curing is not recommended for use with

Answer Discuss in Comment

High alumina cement

113) Which of the following types of concrete mixers is most commonly used in precast concrete factories?

Answer Discuss in Comment

Pan type mixer

114) As compared to moist-cured concrete, the permeability of steam-cured concrete is

Answer Discuss in Comment

More

115) Minimum percentage area of HYSD reinforcement in a 150 mm thick water tank wall is

Answer Discuss in Comment

0.23

116) Torsion resisting capacity of a given RC section

Answer Discuss in Comment

Increases with the increase in stirrup and longitudinal steels.

117) If the compacting factor of a concrete is 0.90, then the workability according to Indian Standards is

Answer Discuss in Comment

Medium

118) The initial and final setting times for ordinary Portland cement are approximately related as ,Where, T and t are final and initial setting time respectively.

Answer Discuss in Comment

T=90 + 1.2t

119) In T-shaped R C. retaining walls, the main reinforcement in the stem is provided on

Structural Design ( RCC )

111) In concrete mix design, allowance for surface water carried by aggregate is necessary in case of

112) Steam curing is not recommended for use with

113) Which of the following types of concrete mixers is most commonly used in precast concrete factories?

114) As compared to moist-cured concrete, the permeability of steam-cured concrete is

115) Minimum percentage area of HYSD reinforcement in a 150 mm thick water tank wall is

116) Torsion resisting capacity of a given RC section

117) If the compacting factor of a concrete is 0.90, then the workability according to Indian Standards is

118) The initial and final setting times for ordinary Portland cement are approximately related as ,Where, T and t are final and initial setting time respectively.

119) In T-shaped R C. retaining walls, the main reinforcement in the stem is provided on

120) A T-shaped retaining wall mainly consists of

Subject Notes

Objective Box

PSC ADVERTISEMENT

Your Reaction

Copyright © | 2021 - 2026 | Civil Boss For "MCQ" and Psc Notes. All rights Reserved

Structural Design ( RCC )

111) In concrete mix design, allowance for surface water carried by aggregate is necessary in case of

112) Steam curing is not recommended for use with

113) Which of the following types of concrete mixers is most commonly used in precast concrete factories?

114) As compared to moist-cured concrete, the permeability of steam-cured concrete is

115) Minimum percentage area of HYSD reinforcement in a 150 mm thick water tank wall is

116) Torsion resisting capacity of a given RC section

117) If the compacting factor of a concrete is 0.90, then the workability according to Indian Standards is

118) The initial and final setting times for ordinary Portland cement are approximately related as ,Where, T and t are final and initial setting time respectively.

119) In T-shaped R C. retaining walls, the main reinforcement in the stem is provided on

120) A T-shaped retaining wall mainly consists of

Subject Notes

Objective Box

PSC ADVERTISEMENT

Your Reaction

Copyright © | 2021 - 2026 | Civil Boss For "MCQ" and Psc Notes. All rights Reserved

Follow us