201) For cantilever beams and slabs, the basic value of span to effective depth ratio is

Answer Discuss in Comment

202) The hoop tension in R.C.C. water tanks must be resisted by

Answer Discuss in Comment

steel only

203) Which of the following is not a measure adopted for reducing deflection?

Answer Discuss in Comment

Decrease steel reinforcement

204) For a fixed beam of span l carrying uniformly distributed load the bending moment at the critical section is given by

Answer Discuss in Comment

wl2 / 24

205) In the limit state designs, the strain in the outermost compression fibre at the time of failure is taken to be

Answer Discuss in Comment

0.0035

206) Compared to plain bars, the deformed bars will have

Answer Discuss in Comment

all the above

207) The probability that the actual strength of the material is more than its characteristic strength is

Answer Discuss in Comment

0.95

208) The optimum water-cement ratio for 1 : 2 : 4 concrete is around

Answer Discuss in Comment

0.60

209) A retaining wall of height h retains earth up to its top without any surcharge. The resultant pressure acts parallel to the top surface and from the base at a distance of

Answer Discuss in Comment

h/3

210) Which of the following tests gives the workability of concrete?

Answer Discuss in Comment

slump test

« Previous 1 … 19 20 21 22 23 … 34 Next »

Structural Design ( RCC )

201) For cantilever beams and slabs, the basic value of span to effective depth ratio is

202) The hoop tension in R.C.C. water tanks must be resisted by

203) Which of the following is not a measure adopted for reducing deflection?

204) For a fixed beam of span l carrying uniformly distributed load the bending moment at the critical section is given by

205) In the limit state designs, the strain in the outermost compression fibre at the time of failure is taken to be

206) Compared to plain bars, the deformed bars will have

207) The probability that the actual strength of the material is more than its characteristic strength is

208) The optimum water-cement ratio for 1 : 2 : 4 concrete is around

209) A retaining wall of height h retains earth up to its top without any surcharge. The resultant pressure acts parallel to the top surface and from the base at a distance of

210) Which of the following tests gives the workability of concrete?

Subject Notes

Objective Box

PSC ADVERTISEMENT

Your Reaction

Copyright © | 2021 - 2026 | Civil Boss For "MCQ" and Psc Notes. All rights Reserved

Structural Design ( RCC )

201) For cantilever beams and slabs, the basic value of span to effective depth ratio is

202) The hoop tension in R.C.C. water tanks must be resisted by

203) Which of the following is not a measure adopted for reducing deflection?

204) For a fixed beam of span l carrying uniformly distributed load the bending moment at the critical section is given by

205) In the limit state designs, the strain in the outermost compression fibre at the time of failure is taken to be

206) Compared to plain bars, the deformed bars will have

207) The probability that the actual strength of the material is more than its characteristic strength is

208) The optimum water-cement ratio for 1 : 2 : 4 concrete is around

209) A retaining wall of height h retains earth up to its top without any surcharge. The resultant pressure acts parallel to the top surface and from the base at a distance of

210) Which of the following tests gives the workability of concrete?

Subject Notes

Objective Box

PSC ADVERTISEMENT

Your Reaction

Copyright © | 2021 - 2026 | Civil Boss For "MCQ" and Psc Notes. All rights Reserved

Follow us